Entertain Your Guests Comfortably

« Back to Home

5 Safety Tips For Installing A New Electric Gate

Posted on

If you are thinking about upgrading to an electric gate for the end of your driveway, you need to make sure that you think carefully about how to ensure that the gate is as safe as possible. Here are five tips that will help you ensure that your new electric gate is not only convenient for you, but safe for your family as well.

#1 Follow The Manufacturer's Instructions

One of the easiest ways to ensure that your family is safe and that your new electric gate works properly is to follow all of the instructions provided by the manufacturer for the safe installation of the gate. These instructions were designed and based on numerous tests to ensure the safe operation of their product, and if you fail to follow the instructions and parameter set out by the manufacturer for safe operating conditions, you risk voiding the warranty on your gate and putting your family's safety at risk. If you don't feel like you can follow all the complicated installation requirements on your own, hire a contractor to assist you with this project.

#2 Add Extra Safety Measures

Generally, there are a few safety measures that come for free with any gate that you are purchasing and looking to install on your property. Most of these gates also come with extra safety features that you can purchase for an additional cost. It is always worth it to purchase these additional safety features as well. Check and make sure that your gate kit has an emergency release mechanism that can be triggered if someone or something becomes trapped or if the power goes out, and make sure that it has a responsive motion sensors that will switch course if it detects something is in its way.

#3 Locate The Gate Controls Away From The Actual Gate

Do not place the gate controls right next to the gate. The controls should not be so close that someone could stick their hand through the gate to access them; this is a very easy way for someone to get hurt. The controls should also be located high enough that a young child would not be able to reach the controls and engage the gate. They should be located a car length or more away from the gate and high enough so that you can access the controls from your vehicle but not low enough for a child to use them when standing next to them.

#4 Add A Pedestrian Gate

If you live somewhere where you are able to or enjoy walking around your block, or your kids enjoy going for bike rides, make sure that you have an easy way for people to leave your property without using the large, electric gate. The best way to ensure this is by adding a small pedestrian gate to your property so that you and your children don't have to deal with the large electric driveway gate every time they want to leave the property; this will help reduce the risk of anything happening to your children in regards to the electric gate.

By taking the safety suggestions into consideration above, you should be able to enjoy the ease of an electric gate while keeping your family safe at the same time. For more tips regarding wiring and installation, contact a company like Narducci Electric.


Share